Thanks justin, that is the problem I am having, when I go to the dvr, change channel, guide or what ever nothing happens then all of a sudden they all happen at once anywhere from 5 seconds to a minnute. I hope they can fix mine?
As for the 480i I have tried all the settings and I know that is not the problem.
I'm having the same problem. I had my router replaced and it did nothing. Hopefully Verizon will have a fix. If not, I'm going to have them void my agreement and i'll go back to comcast. As it stands, their system is unusable.
The STB uses the Router for Channel Guide, VOD, DVR functionaility. Have you tried to reboot the STBs?
Last year I had the ONT replaced but that was because of the inability to watch DVR and VOD from other STBs.
I suggest you run through the Customer Support on the STB to reboot and fix problems. If you still have issues I report the problems to CS and have them document your issues.
now latley if I push the drv button I get delay of 10-20 seconds and it go's to widgets??? what the _____???
As I said earlier, my DVR has gone back to working normally so I can't try to reproduce that. But when it wasn't it never did that, I use the DVR button frequently.
I am trying to get some Verizon attention to this issue, to at least get some explanation for what you and others are seeing and a target for resolution, no success so far, but I am hopeful....
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248
I should also say that I have two other set top boxs, one hd and the other not hd and they give me the same problem?
08-26-2012 06:22 AM - edited 08-26-2012 06:23 AM
There is now a thread over on DSL reports FiOS forum with a bunch of reports of the same thing.
It is not just the 7232 (as the title may imply) but both 72xx DVRs (happening on my 7216).
08-26-2012 10:12 AM - edited 08-26-2012 10:39 AM
Not sure what the issue is, but I have heard it is actively under investigation.
I think it may have something to do with subscription management, and the copy protection bit that was just recently enabled in the hardware Aug 1st. But that is just my opinion.
I hope it is fixed quickly, regardless of whatever the cause. I am on Cisco hardware, and have not experienced the issues regarding how the subscription, encryption or security technology is executed. No Guide or menu delays here, changing channels, or otherwise. But Cisco is still on img 1.9, and not 1.91. Please do not break mine.