- « Previous
-
- 1
- 2
- Next »
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ah i thought you were referring to the issue where if you FF from a 2500 stb that sometimes it will go the beginning when pushing play. I am having the Unable to locate hub error message as well. Here is my response to another post on the same subject:
@TheSanchez wrote:
I was having this issue so i called in. The representative I spoke to was extremely Knowledgable. He did some research, which took about 20min, and found the answer. Apparently this is a known issue that has occured with the new IMG update. He said that the IMG developers know about the problem but do not have a target date for a fix yet.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Since I received 1.6 (southern CA) Skip doesn't work and fast forward from STB of DVR recordings is sluggish. In addition it now "randomly" Fast Forwards whenever it wants to. Called support they reset... but no good... any ideas?
PS: when it starts Fast Forwarding the only way to stop is to hit rewind, then play Pause doesn't work.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@TheSanchez wrote:Ah i thought you were referring to the issue where if you FF from a 2500 stb that sometimes it will go the beginning when pushing play. I am having the Unable to locate hub error message as well. Here is my response to another post on the same subject:
@TheSanchez wrote:
I was having this issue so i called in. The representative I spoke to was extremely Knowledgable. He did some research, which took about 20min, and found the answer. Apparently this is a known issue that has occured with the new IMG update. He said that the IMG developers know about the problem but do not have a target date for a fix yet.
So last night I used the Multi Room DVR for something other than a movie. I recorded the Sugar Bowl, and when I got home last night, I went back into the bedroom to watch the 2nd half.
Since I was able to watch the first half live, there was no need for me to watch it again. I must have had to start over about 10 times.
I would SKIP to the 2nd half, and then I would want to FF through the commercials. When I would press PLAY, it would jump all the back to the first quarter.
Sometimes on the SKIP it would just freeze up, and when I would RESUME PLAY, it would be back in the first quarter of the game.
I finally decided to SKIP (5 min) to the 2nd half, change my SKIP settings to 30 seconds to watch the 2nd half. I think I only had to restart the program twice when I did this. However, I did FF after then end of the game.... back to the start!!!
It would also start over when I would PAUSE.
The DVR is the 6416, and then STB I was viewing at the time was a 6200-2.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Same problem here... Fast forward, and jump back to the show start.
Especially fustrating for long shows that you cannot watch in one sitting.
Really miss the Tivo feature of a 15-minute jump.
- « Previous
-
- 1
- 2
- Next »