An Accepted Solution is available for this post.
Actiontec GT784WNV modem/routher
robert210
Newbie
‎05-14-2014 03:01 PM

I just received a Actiontec GT784WNV  modem/routher, but there was no User Manual enclosed, even though the Verizon leaflet says ""If you require additional information, please see the user manual." I phoned Verizon and the girl said "What do you need a manual for?" I phoned Actiontec and they said they do not have manuals (physical or online) and to call Verizon. I am going around in circles. Can anyone tell me where to get a manual for this Actiontec GT784WNVI

I am a octogenarian and this is all so confusing to me and Verizon has been of no help to me, other than switching me from person to person; not one of them doing anything to help me.

Where can I get a manual (physical or online?

Can anyone please help me?

0 Likes
Reply
2 Replies
An Accepted Solution is available for this post.
Re: Actiontec GT784WNV modem/routher
Telcoguru
Master - Level 1
‎05-14-2014 06:15 PM

I did not find a user manual but the following website has links for setting up various features. http://search.verizon.com/?tp=r&rv=r&q=GT784WNV

0 Likes
Reply
An Accepted Solution is available for this post.
Re: Actiontec GT784WNV modem/routher
dslhelp
Newbie
‎09-23-2014 09:40 AM

Note: The Actiontec GT784WNV security screens and prompts may vary slightly from these directions depending on when you purchased your gateway and the firmware loaded on it.

To reset your Actiontec GT784WNV to factory default settings:

  1. http://www.verizon.com/cs/groups/public/documents/adacct/selfinstallhsi02_2013.pdf
  2. Open your Web browser and enter http://192.168.1.1 in the Address field.
  3. Enter your user name and password and click Continue. Your default user name is admin if you didn't change it when you configured your network.
  4. From the top navigation, select Utilities.
  5. From the Modem Utilities navigation, select Restore Defaults. From this screen you can restore the Gateway’s wireless settings, firewall settings or all settings to their factory default state.
  6. Press the appropriate button to restore your settings. During this process, the Gateway’s Power Light flashes and the Gateway is disabled until after rebooting.Your Actiontec GT784WNV is now using the default settings for the network configuration.

If you cannot access the gateway’s internal interface, perform the following steps:

  1. Using a paperclip, press in and hold the Reset button for 30 seconds.
  2. After 30 seconds, release the Reset button and turn the power off to the D-Link 2750-B.
  3. Leave the power off for 20 seconds.
  4. Turn your gateway back on.
  5. Reboot your computer.
0 Likes
Reply