- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a Westell 327W hooked up to three computers (Linux, Mac, Windows XP). I have noticed that when I upload any significant amount of data, even at the modest rate of 60kb/s, downloads from the Internet grind to a virtual halt. Pings which take 25 ms with nothing else running and 200 ms while a download is running take 9000 ms (nine seconds!) or more while an 60 kb/s upload is running. Now, I am supposed to be getting at least 128kb/s up and 700-something kb/s down. It is clear that some kind of choking is going on. Local experimentation shows that it is not the modem -- the modem can sustain much faster speeds locally in both directions simultaneously. So what's the story? 60 up OR 400 down, when 128 AND 700-1000 were advertised? (I have never observed a faster download from the Net than 420 kb/s, but I'll complain about that some other time.) If Verizon is deliberately choking their interfaces to discourage file-sharing or doing a Comcast-like packet-sniffing number, I'd like to know so I can make the appropriate trouble about it.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Post your modem status/stats from your router.
If you have no idea of what I mean.. Log-in to the router and show the first screen that you see.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I see three panels. Sorry about the possibly weird formatting.
Third panel is links to, like, Westell etc. etc.
First panel:
Gateway Status
GO!
Your Gateway is Ready for Internet Access Broadband Connection Internet Status: Connected DSL link: Connected Speed (Down/Up): 3355 Kbits/sec by 863 Kbits/sec Connection Type: PPP Username: IP Address: 71.190.3.11
Unknown Name: Connection Type: Unknown
IP Address:s
-- second panel -
Unknown Name: Connection Type: Unknown IP Address:
192.168.1.38
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Does that three panels, look something like this screen
a) http://www.portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/1st_SMTP_Server.htm
?
If not, how about this screen
http://www.portforward.com/english/routers/port_forwarding/Actiontec/GT704-WGv2/1st_SMTP_Server.htm
?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The second has the greatest resemblance.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
#1 Ok, try System Monitoring -> Advanced Status -> Transciever Stats.
#2 Try Status -> Advanced Status -> Transciever Stats
#3 or Try Utilities ?
#4 In the router, go to Advanced Setup.
#5 In there, go to IP Address Distribution.
#6 What is the DHCP range?
#7 Back in Advanced Setup, go to UPnP.
#8 If this feature is on, turn that feature off.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am away from my modem right now. I will be back on Sept. 30, when I will revive this
thread, try the diagnostics that have been suggested, and perform some additional
experimentation. So far it seems clear that the modem can handle over 700 kbs
bidirectionally when communicating locally, but as soon as any upload traffic occurs
in the range of 60 kbs, down traffic slows to a crawl, so something's going on.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In "IP Address Distribution" the Private LAN DHCP Settings are:
start: 192.168.1.15
end: 192.168.1.47
DHCP Lease Time: 1:0:0:0
I observe that addresses are assigned high to low.
UPnP appears to be turned off (box is unchecked).
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In your router when forwarding you are forwarding to some IP Address where the last octet, as it called, is not 0, 1, any number from 15 to 47 OR any number above 255?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Not sure what you're after here. As far as I know (in this universe) the highest possible
value for an octet is 255. I do not do any forwarding manually -- whatever takes place
is the business of the router-modem and whatever processes it's talking to in one of
my machines. On the local side of the router, I have never
observed an address outside of the range 192.168.1.40 - 192.168.1.47 and of course
192.168.1.1 which is the address through which I talk to the router itself.
For the reasons I gave before I doubt that the router is having a problem.
I suspect that the problem is with whatever it's talking to on the Verizon
side. Otherwise I would think local traffic would exhibit the same pattern
of apparent interference.