An Accepted Solution is available for this post.
Re: Double NATted - Bridging!
NetSec
Enthusiast - Level 2
‎03-06-2011 07:08 PM

Bridging will fix the double natting concern!

http://www.dslreports.com/faq/13600

Reply
An Accepted Solution is available for this post.
Re: Linksys router no longer works with Westell 6100 modem
salexander303
Newbie
‎07-02-2011 12:18 PM

This issue seems to only happen on the WRT54G, but I found a solution that works and does not require bridging the Westel modem.

I had a belkin router that was working without any configuration but started dropping the connection.  The Belkin router was attached directly to the Westel modem set  with the info below.

With the WRT54G I just had to create a static route using the WAN IP provided  from the modem which is 192.168.1.47.

ersion Info      LAN Settings      Firmware Version 5.00.12 (Sep 10 2009 19:54:12)      LAN/WLAN MAC 00:22:75:DC:FE:4B    Boot Version 1.18      IP Address 192.168.2.1    Hardware F5D7234-4 v5 (01)      Subnet Mask 255.255.255.0    Serial No.        DHCP Server Enabled (1 LAN, 2 WLAN Clients)            Internet Settings      Features      WAN MAC Address        Firewall Settings Enabled    Connection Type Dynamic      SSID      WAN IP 192.168.1.47      Security  WPA-Personal ( PSK )    Subnet Mask 255.255.255.0      UPnP Enabled    Default Gateway 192.168.1.1      Remote Management Disabled    DNS Address 192.168.1.1      WPSEnabled    

0 Likes
Reply