×

Switch Account

Second Router with wireless.

Second Router with wireless.

SOLVED
Reply
Highlighted
Contributor ma12
Contributor
Posts: 1
Registered: ‎05-24-2019
Message 1 of 2
(795 Views)

I am visiting a Verizon customer with DSL and doesn't have wifi.

I had an old Linksys router that I used to hook up in these situations, configured it to have 10.0.0.x addresses and connect it with an enthernet cord and that would allow my non-ethernet computer to get to the Internet.  I can't find the power cord.

 

I have an old Verizon model Model Name: MI424-WR router, which I can't figure out how to get to work.  I changed the IP addresses, I made it DHCP relay, etc.   It doesn't feel like it is receiveing an IP address when I plug the ETHERNET WAN to the DSL modem.

 

I searched the Internet which has had some advice, but nothing has worked, does anyone have a source of instructions they know work?

1 REPLY 1
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 7,360
Registered: ‎12-15-2010
Message 2 of 2
(713 Views)

What DSL modem do you have? If the modem doesn't have a built-in router or is in bridge mode, your WAN connection type will likely be PPPoE instead of DHCP.

 

I don't remember if the ActionTec MI424WR has the option of using PPPoE for WAN. If that's the case, and you have a modem like the Westell 6100,  the modem can be put into PPPoE mode and then configured to pass the public IP through to your router (Routed Bridge).

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.