×

Switch Account

Westell 327W port forwarding problem

Reply
Highlighted
Contributor
Contributor
Posts: 2
Registered: ‎05-28-2009

Westell 327W port forwarding problem

Message 1 of 4
(13,525 Views)
I have a Westell 327W and cannot get port forwarding to work. I've read endless posts about HOW to do it and I am savvy enough to understand how to do this correctly, but the 327 refuses to cooperate. I can open the port and verify it IS open, but have been unable to get it to direct to the proper IP address. I can open port 2420 and get to the 327's admin from outside, but the 327 refuses to direct requestes to anything other than the host PC. Anyone else been able to correct this problem? I used to be able to do it when I had ATT/SBC service with the 2wire modem/router. I even tried a WRT54G and couldn't get that to work either!
3 REPLIES 3
Highlighted
Trivia Champ
Trivia Champ
Posts: 5,957
Registered: ‎09-24-2008

Re: Westell 327W port forwarding problem

Message 2 of 4
(13,478 Views)
#1 How did you verify that the port is open:

For example, using any of the following websites:

grc.com shields up

http://www.dyndns.com/support/tools/openport.html

http://www.whatsmyip.org/ports/

http://www.canyouseeme.org/

^^ ?

#2 Do you have only one computer or at least two computers behind this router?

If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.


 

Highlighted
Contributor
Contributor
Posts: 2
Registered: ‎05-28-2009

Re: Westell 327W port forwarding problem

Message 3 of 4
(13,466 Views)
canyouseeme shows my ports open. I have two computers and two DTivo (hacked) boxes. When I has ATT service with 2wire equipment I had no problem doing port forwarding. But since I moved and had to switch to verizon, the Westell 327w has NOT worked. I have the tivo set to answer on port 1080. works from my side of the westell, but not from outside. If I turn on remove admin in the 327 it works. But it seems to refuse to communicate with anything but my main computer. Haven't tried to set up a web server on the computer to see if I can get it to answer on port 1080 yet. I'm no newbee but this ones go me stumped. Verizon support refuses to anwser ANY questions about this "feature".
Highlighted
Trivia Champ
Trivia Champ
Posts: 5,957
Registered: ‎09-24-2008

Re: Westell 327W port forwarding problem

Message 4 of 4
(13,430 Views)
If remote access is turned off in your router and the port is open from the net but you can not connect using the WAN IP (and port number as need be), your router either has loop back support turned off OR your router does not have loop back support.

If the router does not have loop back support, points to:

http://forum.portforward.com/YaBB.cgi?num=1221247720

Which is, portforward.com -> forum -› Knowledge Base -› router does not have loopback support.

^^

If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.


 

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Covid19


Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.