An Accepted Solution is available for this post.
reprograming door lock
shymedq1
Enthusiast - Level 3
‎10-11-2012 06:32 PM
so I no longer have fios but I paid for the door lock so how do I reprogram the numbers to something else without going on verizon website anyway to do it on the lock it self?
Labels (1)
0 Likes
3 Replies
An Accepted Solution is available for this post.
Re: reprograming door lock
Lew_D_Vz
Enthusiast - Level 2
‎10-12-2012 10:44 AM

Insturctions for local programming of your door locks are available on the Internet as follows:

Dead Bolt Door Lock: http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Lever Door Lock: http://consumer.schlage.com/Project%20Documents/P515-859.pdf

0 Likes
An Accepted Solution is available for this post.
Re: reprograming door lock
shymedq1
Enthusiast - Level 3
‎10-12-2012 04:14 PM
i cant get the lock to reprogram or change the key it says press (pc) then schlage button but what is pc button?
0 Likes
An Accepted Solution is available for this post.
Re: reprograming door lock
perlinef
Enthusiast - Level 1
‎11-04-2012 04:08 PM

The PC refers to the Programming Code. You can find it by opening the lock--taking it off the door; there should be a sticker with that info. The lock comes with a preset programming code and user code (UC)--unless you changed it. In that case, you can reset to the factory code by taking out the  battery, press "Schlage" put the battery back in, then press and hold "Schlage." At least that's how my lock works.