05-19-2014 11:59 PM - edited 05-20-2014 12:47 AM
Here is a Resolution! I've spent hours trying to set up my Outlook 2010 to work with my third-party (non-verizon) email, and I finally came up with a resolution. After culling through many posts, I was able to piece together what I needed to make it work, and I thought I would share... with pictures.... (my example is with NetZero; but these settings can be used for any other account).
The idea is that your email will be received from the POP3 server that belongs to the provider of your email address. The sending provider will be Verizon.
(1) In Outlook, under "File", select "Account Settings"
(2) Once the "Account Settings" window opens, either select "New" to create a new account, or "Change" to update your existing account...
(3) In the "Internet E-mail Settings" window, fill in your information. (Here, I use Netzero's POP server, but you would replace with your emai account's POP server). Note, that the OUTGOING MAIL SERVER is set to "smtp.verizon.net". (If you have seen references to "outgoing.verizon.net," these are older references. "smtp.verizon.net" (as of 5/19/2014) is the correct outgoing SMTP server...
(4) Next, click the "More Settings" button. The two tabs that will be the most interest to you are "Outgoing Server" and "Advanced."
-- Under the "Outgoing Server" tab, check "My outgoing server (SMTP) requires authentication.
-- Next, select "Log On using" and enter your user name and password that you use to login to your Verizon account at www.verizon.com. Note: DO NOT check "Require Secure Password....". Here is the screen:
(5) Next, click to the "Advanced" tab. The four settings you will be most interested in are:
(a) Incoming server (POP3): 995
(b) Check, "This server requires an encrypted connection (SSL)
(c) Output server (SMTP): 465
(d) "Use the following type of encrypted connection", select "SSL" from the drop-down.
NOTE: You can optionally set the items in the "Delivery" section of the screen.
(6) Click "OK" to save your settings.
(7) Now, back on the Account setting screen, click "Test Account Settings". If your settings are correct, you will see Succes in both receiving and sending email.
(8) You should be able to complete your setup.
I hope this brings some clarity for those of you who, like me, have trouble following some of the other posts and don't fully understand what is needed when they just say what the settings are without SHOWing how they are set.
Here are some other pages that helped me for reference:
05-20-2014 02:46 PM
NOT A RECOMMENDED SETUP.
You should instead setup two accounts. ONe as netzero wants it and one as Verizon wants it. Many clients allow you to specify which account is used for sending all email responses, There will be some responses from the Verizon POP that pile up at times if you try and use your setup.
05-20-2014 05:46 PM
He has it retrieving pop from netzero not verizon. So email sent to verizon including any responses triggered by his sent email is not being retrieved.
05-23-2014 11:24 PM
TNS_2, you are correct in noting that with this setup, any email sent to a Verizon account would not be received, and a separate acount in Outlook would need to be created in that solution. Please note that I did say in the opening sentence that this setup was "to work with my third-party (non-verizon) email...." I actually don't use the Verizon email address(es) assigned to me which is why I only focused on these particular settings in order to receive email from a non-verizon account.
If folks don't use a third-party email address and use only their Verizon account, then in the "Incoming mail server" setting they would enter "pop.verizon.net", and put their Verizon email address in the "User Information" and "Login Information" sections. If a user has multiple email addresses, then it is appropriate to set up multiple accounts in Outlook, and set the "Incoming email server" field to the corresponding POP server for that email address. The SMTP setting would remain "smtp.verzion.net".
Thank you for your clarification.
10-04-2015 01:51 PM
Thank you so much!! Spent a lot of time trying to get this to work...