Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu

Anyone Using A Home Server ?

Reply
JN
Contributor
Contributor
Posts: 3
Registered: ‎10-12-2008

Anyone Using A Home Server ?

Message 1 of 5
(13,140 Views)
I have a home server which I have connected to FIOS and setup NAT to enable a blog, FTP etc over the internet, but nobody across the WAN can access the pages.  I know I have the server setup correctly (cos it worked with my last ISP), so it has to be the Verizon router.  I have setup another HTTP port (cos Verizon blocks port 80), but still nobody can access.  I even had a FIOS network techy remote in to check the router, but he could find nothing wrong.  As Princess Leia said "You are my only hope" .... 
4 REPLIES 4
klipko
Copper Contributor
Copper Contributor
Posts: 7
Registered: ‎08-06-2008

Re: Anyone Using A Home Server ?

Message 2 of 5
(13,098 Views)

My first thought is that you may not be using the right IP address. Can you ping the server?  Better yet if your using Dynamic DNS service is the name being translated to your correct (external) IP address?

 

 

JN
Contributor
Contributor
Posts: 3
Registered: ‎10-12-2008

Re: Anyone Using A Home Server ?

Message 3 of 5
(13,088 Views)
Checked using Dnsstuff.com and tracert - IP correct but 'no reply' from router.  Checked using ping command from within LAN, using external IP and URL and no problem seen (I have used DynDNS for years and have had no problems).  Not sure what this proves ...
klipko
Copper Contributor
Copper Contributor
Posts: 7
Registered: ‎08-06-2008

Re: Anyone Using A Home Server ?

Message 4 of 5
(13,066 Views)

Humm...  It's hard to say what the problem is but maybe try enabling remote administration to the router.  If you can connect to the router outside of your network then it tell me that it's something with the port forwarding setup.  (If you do setup remote Admin. make sure to turn it off when done.)

 

I logged on to my router and noticed (and forgot) that you'll need to enable "ICMP Echo Requests"in order for ping to work.  Enable that and see if ping requests are being returned outside your network.

 

 


JN
Contributor
Contributor
Posts: 3
Registered: ‎10-12-2008

Re: Anyone Using A Home Server ?

Message 5 of 5
(12,929 Views)

Thanks Klipko,

I have been away on work, but eventually got the thing to work, although I couldn't pin it down to one change I made to the setup.  FTP still not working, but HTTP is good enough for now.  Thanks for your support 

:smileywink:

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title