Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu

Cisco VPN Client not working at home

Reply
drbozai
Copper Contributor
Copper Contributor
Posts: 15
Registered: ‎07-15-2013

Cisco VPN Client not working at home

Message 1 of 3
(9,221 Views)

I bring my Work laptop which has Cisco VPN Client installed thats works at the office.  I can't seem to get the VPN connected when I'm at home (wired & wireless), and can't access my network drives.  My VPN trasnport settings are as follows:

 

Capture.PNG

 

I spoke with Verizon and we tried DMZ for my work laptop (and port forwarding), and nothing worked.  I suppose this is a Verizon fios router issue since it works over at my office.  Please help if you have any experience with this.  Thanks!

2 REPLIES 2
gs0b
MVP MVP
MVP
Posts: 2,122
Registered: ‎12-02-2012

Re: Cisco VPN Client not working at home

Message 2 of 3
(9,189 Views)

I use the Cisco "Any Connect" VPN client to connect to my company's network without any difficulty.  I have FiOS and an Actiontec rev I router.  I didn't have to set anything up; it just works.

 

You might want to check with your company's IT department.  They might have some suggestions based on how they have the VPN setup.

 

Good Luck.

 

Smith6612
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 7,627
Registered: ‎12-15-2010

Re: Cisco VPN Client not working at home

Message 3 of 3
(9,170 Views)

Second talking to your IT department. In most cases with the old Cisco VPN Client, and this is with my own experience, you could resolve 99% of the connection issues by switching the VPN client to use IPSec over TCP. This adds additional overhead and can cause a slight performance decrease, but in cases that I've dealt with such as shoddy Hotel networks, it's helped.

 

Otherwise, make sure the problem isn't due to a bad path between you and your company's VPN Gateway. Your IT department should be able to help diagnose this. Otherwise, also make sure your router's Firewall is not turned up too high. If this is set to anything higher than Low, you can run into problems where specific applications won't work. You can check this by going to http://192.168.1.1/ and after logging in using the username of admin and the password being the router's serial number, click on the "Firewall" option in the navigation. While you're here, check to see if any options for "VPN Passthrough" or "ALG" shows up under Advanced. You may wish to toggle IPSec ALG on or off to see if this makes a difference. It's usually best to keep ALG off.

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title