Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu

Question about moving FiOS router in the home

Posts: 1
Registered: ‎10-15-2012

Question about moving FiOS router in the home

Message 1 of 4
Not sure how to go about doing this, so I figured I would ask here. I want to move the Actiontec router in my home from where it is on the 2nd floor to my living room. I want to be able to directly connect my desktop to the router rather than have it work wirelessly, plus the router is in my kids room and I don't want them getting their hands on it. The router is current connected to the coax connection on the 2nd floor where we originally had the connection setup. I have our TV downstairs with our DVR box, and I want to use the router near this with the desktop nearby. My question is this, how can i move the router to the downstairs location to get the incoming feed from the FiOS connection from outside. Will I need a splitter to split the TV and internet connection, or have to find a way to get a 2nd incoming connection to use the router downstairs?
Bronze Contributor II
Bronze Contributor II
Posts: 147
Registered: ‎11-18-2009

Re: Question about moving FiOS router in the home

Message 2 of 4

Just use a splitter to split the coax that goes to the dvr. Now it may or may not work but you have to try. Also if it works you may or may not have signal issues.

Silver Contributor II
Silver Contributor II
Posts: 265
Registered: ‎01-09-2012

Re: Question about moving FiOS router in the home

Message 3 of 4

Since your ActionTec provides WiFi, having iton the 2cnd floor is better as it should be at a high point within the home.  However if you don't use WiFi then m oving the Router will be a moot point.  It would be a matter of moving RG6 cable (with good F-Connector ends) to the new location.


In your present location, the Router is most likely be connected to a splitter.  Follow the cable in the 2cnd floor location back and down to that splitter and remove the cable from that splitter.  Then you will have only two connections on tghe splitter.  One on the Input and one on one of the two output connectors.  Remove the splitter and replace it with a back-to-back female F-Connector (availble at Radio Shack and places like Home Depot).  If the Router will be placed near the TV Set Top Box, you will need to have a length of RG6 (with good F-Connector ends) and the splitter you removed.  Where the cable went into your TV Set Top Box, you would connect it to the Input of the splitter.  On one of the two output  connections, it  will be connected to the TV Set Top Box.  The other goes to the ActionTec Router.


If you are not ready to use a F-Connector compression tool and make your own RG6 cables or this sounds complicated to you, then call Verizon and have them relocate the Router for you (Verizon will charge you for the service).

The Lithium Software sux !!
Platinum Contributor III
Platinum Contributor III
Posts: 6,820
Registered: ‎08-23-2008

Re: Question about moving FiOS router in the home

Message 4 of 4

Also one thing to consider is the new Quantum speeds of 150/60 and above are connected with a CAT5e or CAT6 Ethernet cable to the routers WAN, if you ever plan on an upgrade. They would probably run the new Ethernet cable and switch your router. If you plan to stay at somewhere like 50/20 or 75/35. Your probably in good shape. Providing you have a good RG6 cable and clean connections.

How-To Videos
The following videos were produced by users like you!
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Browse Categories

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title