Accessibility Resource Center Skip to main content
Get up to $500 when you bring your phone. Plus, get the incredible iPhone 13 Pro on us. Online only. With select 5G Unlimited plans. Ends 12.5. Buy now
end of navigation menu

Switch ONT to Ethernet

SOLVED
Reply
coachDOC
Contributor
Contributor
Posts: 4
Registered: ‎07-15-2020

Switch ONT to Ethernet

Message 1 of 4
(2,816 Views)

 

I have a G1100 Quantum Gateway connect to the ONT via coax.   We use FIOS internet only . . . no TV.   I was told by the Verizon rep that I cannot upgrade internet speed to fast than 100Mbps in this configuration.  The rep further said that a tech visit was necessary to change the ONT from coax to ethernet, and yet I read here that many times this change can be done remotely.

My ONT is i-211-M-K.  Any reason that unit wouldn't work for up to gigabit speeds?  The Verizon rep, via chat, said a tech has to come out "because of how it's wired".  I'm thinking I could just run a cat5 or cat6 cable from the ONT to the router then call them and tell them to turn on the ethernet.

 

If a tech visit is necessary, then ok.   But it's expensive, so I'd like to be sure.

 

Appreciate input.

 

1 ACCEPTED SOLUTION

Accepted Solutions
CRobGauth
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 8,010
Registered: ‎11-04-2008

Re: Switch ONT to Ethernet

Message 3 of 4
(2,783 Views)

I would go ahead and run the ethernet cable.

Then contact support (you may get more timely support by using twitter @verizonsupport They should be able to let you know if everything is in place for upgrade. And then actually do the migration from coax to ethernet.

From there, you should be able to order the upgrade


If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

View solution in original post

3 REPLIES 3
coachDOC
Contributor
Contributor
Posts: 4
Registered: ‎07-15-2020

Re: Switch ONT to Ethernet

Message 2 of 4
(2,772 Views)

So I found info on that ONT.    Looks like it should support Ethernet at faster than 100Mbps.

 

AlcatelI-211M-KSFUInterior
Desktop
Exterior
1: MoCA1: 10/100/1G Ethernet

2

 

So I think now that I can run an ethernet cable from the ONT to the G1100.  Then call and have ethernet activated.  At that point, I could upgrade my speed or change to a different router.   Anything else to be aware of?

CRobGauth
Platinum Contributor III Platinum Contributor III
Platinum Contributor III
Posts: 8,010
Registered: ‎11-04-2008

Re: Switch ONT to Ethernet

Message 3 of 4
(2,784 Views)

I would go ahead and run the ethernet cable.

Then contact support (you may get more timely support by using twitter @verizonsupport They should be able to let you know if everything is in place for upgrade. And then actually do the migration from coax to ethernet.

From there, you should be able to order the upgrade


If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
GaryDM
Moderator Moderator
Moderator
Posts: 2,557
Registered: ‎07-06-2016

Re: Switch ONT to Ethernet

Message 4 of 4
(928 Views)

In order to keep discussion on the community current, this topic has been locked to prevent new replies. If you have a similar question or issue that you wish to discuss, then please feel free to post a new message on the most relevant board. Thanks!

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title