$500 via Verizon e-gift card (sent w/in 8 wks). Activation of 4G LTE/5G phone on One Unlimited for iPhone (all lines on account req'd on plan), 5G Do More, 5G Play More or 5G Get More plans req'd. Device must remain active for 45 days. $500 charge back if service cancelled w/in 12 mos or eligibility req's are no longer met. See vzw.com/bring-your-own-device for details. And for a limited time, we’ll waive your activation fee when you order through vzw.com or My Verizon app. You’ll see the one time charge waived as your “Due Today” amount at checkout.
Thanks so much for your solution to HD boxes dropping sound. I tried your PCM solution and so far it seems to be working.
It mainly results in your own TV settings (in my case Hitachi) being changed to the PCM setting.
I too had tried explaining my problem to Verizon Fios technical support. They did try to help but in the end nothing worked. They suggested a new HD set top box but I had heard that most times that did not fix the problem.
My problem was mainly with the Bravo channel. I would lose the audio everytime a commercial would end to connect back to the TV show I was watching. Had to keep turning the TV off and on to reset. Such a nuisance.
Hopefully everyone will see this message. Ridiculous that Verizon will not try your solution and use this to help their customers stop this very annoying loss of volume problem!
You are an Angel!! Thank you so much for your post regarding the Fix for the Fios HD Sound Drop Off!!
After three years of total frustration with turning off and turning on my TV and so many fruitless calls to Fios Techs, your fix has worked!!
It has been about 20 hours and no loss of audio! I am afraid to actually say this for fear the Fios TV Gods may
come up with something else to screw up our lives!!
I have also attached your post (hope it is ok with you) to my most recent article today regarding this issue and given you the much deserved kuddos for your efforts that you so deserve to solve this problem and help us all in Fios TV Land to let go of our remotes!!!
Use the OK button on remote and then select Menu after turning Set Top Box off to get to the White Screen of User Settings. But make sure to do this quickly after turning Set Top Box off as it will reset and turn the Set Top Box on again.
I had to do this several times to get to the white screen as Idid not do it quick enough. I think ConcernedUser post meant to say the OK button instead of Select on the remote as there is no Select button.