I have a Replay TV 5000 series DVR. I am getting the channel guide, but the IR blaster (using code 0276, 0476 and a variety of other codes) changes the channel on the Fios box, but to the wrong channel. The channels I get are:
Replay TV Fios
4 = 44
51 = 551
180 = 1800
I have two Motorola Fios boxes:
Do you have any suggestions?
Would a Motorola DCT 700 converter help?
Thanks for your help!
This seems to be a known problem. There is a suggested solution however,
see http://www.digitalnetworksna.com/support/replaytv/document.asp?docID=228
The link provided by JMW1950 does *not* solve the problem.
As mentioned in the original post 0476 and 0276 were tried and they do not work. I am experiencing the same problem with my ReplayTV 5000 series.
If anyone has a working solution to this problem, please reply.
I had a similar issue a while back with my ReplayTV and the QIP-2500 SD box where the last digit was repeated (about 50% of the time). In the ReplayTV settings, I changed the "Minimum Number of Digits to Send" to 1 and I adjusted the delays. I use code 0476 by the way. Hope this helps.
http://www.digitalnetworksna.com/support/ReplayTV/document.asp?docID=223
I could not get it to work with the HD box so I tried the standard box and that seems to work using IR code 0276. The box is motorola qip 2500-3. I am not sure Verizon is is supporting these boxes in the long term. I think Verizon wants to discontinue the standard def stb.
Start a new topic or ask questions in the open forum.
