An Accepted Solution is available for this post.
STB 6200
GodwinTurk
Enthusiast - Level 1
‎10-07-2008 11:59 AM

Every couple of days when I turn on the box and TV I get  "No Signal" and have to reboot the box.

Anyone else come across this? Any ideas?

0 Likes
3 Replies
An Accepted Solution is available for this post.
Re: STB 6200
Keyboards
Master - Level 3
‎10-07-2008 12:48 PM
Usually this is an HDMI communications problem between the STB and the TV (the HDMI handshake failed).  Not a fix, but have you tried using component cables (red, green, blue RCA jacks)?  Sometimes the sequence of powering on makes a difference as well. 
Message Edited by Keyboards on 10-07-2008 03:50 PM
0 Likes
An Accepted Solution is available for this post.
Re: STB 6200
ReggaeMeCrazy
Newbie
‎10-28-2008 06:40 AM

The first question I would ask is do you have a Samsung TV.  I had been experiencing this issue with my Samsung and it turned out to be a compatibility issue with the Motorola box and that brand of TV.  I do not have this issue with the other HD TV I have.

 

The fix is to use the "component video" ..... (blue, green, red) connection.

 

I am not sure this addresses your issue completely, but it has worked for me

0 Likes
An Accepted Solution is available for this post.
Re: STB 6200
GodwinTurk
Enthusiast - Level 1
‎10-28-2008 07:09 AM

I have switched to the component cables and the problem seems to be solved.

Thanks.

BTW. the TV is a Magnavox.

0 Likes