We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back. It is very intermittent, may work fine for hours then will do this for several hours. All cable connections are tight, tv's are new. Any other ideas?
@Fishermanwr wrote:We have 2 sets out of 4 that will pixilate, go blank for 5-10 seconds then come back. It is very intermittent, may work fine for hours then will do this for several hours. All cable connections are tight, tv's are new. Any other ideas?
Try swapping the connections at the splitter: The 2 pixilating ones with the 2 that are OK. See if the problem goes with the switch. If it does then it's the splitter. By the way this is strictly a guess.
Start a new topic or ask questions in the open forum.
