- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
About twice a week this modem/router drops the correct ip configuration. This moring I did an ipconfig on my PC to find the address set to 169.254.32.217 with a subnet mask of 255.255.0.0 and no default gateway. I turn OFF the modem/router for 30 seconds, turn it back ON and after completeing the boot cycle the addresses are correct and I can get onto the internet.
This has happend many times over the past 2 yaers and this type modem/router has been replaced 3 times with no permanent fix. I would like to know if it is the modem/router or the Verizon ISP/DSLAM causing the problem.
Calling Verizon at this time would probapbly be useless since they are still on strike but I would like to know for my own satiisfaction.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
#1 Are you using a wired connection or a wireless connection?
#2 Do you have a spare/Separate RJ-45 WAN port router?
#3 If so, what is the brand and model of your spare/Separate RJ-45 WAN port router?
For example:
a) The Motorola SB6141 is my cable modem (Non modem combo).
b) Note where modem combo = modem and router all-in-one.
c) My Separate router is my Linksys E4200 hardware version one and it is behind my modem.
d) I also have a spare Linksys WRT54G hardware version 2, not in use.
#4 If not to question 2, do you have a spare computer that is not in use that works that either has:
a) Two NICs
b) OR you can add a second NIC into the computer?
For example by a second NIC into the computer I mean a PCI NIC like the TRENDnet - Fast Ethernet PCI Adapter (Model: TE100-PCIWN).