Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu

SD-HD Selection

SOLVED
Reply
tyg
Contributor
Contributor
Posts: 2
Registered: ‎09-29-2011

SD-HD Selection

Message 1 of 3
(1,922 Views)

After our HD STB received the IMG 1.9 rollout, the first person to turn it on selected the SD option, even though the STB is attached to an HD TV.  Is there a way to reset the installation so it can be reaccomplished in the HD version?  We've already tried resetting the box (unplug and repower).  Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
nascar
Gold Contributor IV
Gold Contributor IV
Posts: 1,252
Registered: ‎09-11-2008

Re: SD-HD Selection

Message 2 of 3
(1,908 Views)

You need a 7 Series box....

 

Try this... 

 

To make the guide correct for your TV... Hit Menu on the remote and then go to >> Settings >> Video Settings >> Graphics Settings >> SD or HD 

 

There are plenty of settings in Settings to adjust the screen and guide but you need a 7 series box to take advantage of them.

 

If you don't have a 7 Series box or boxes, I'd get them.

 


tyg wrote:

 

After our HD STB received the IMG 1.9 rollout, the first person to turn it on selected the SD option, even though the STB is attached to an HD TV.  Is there a way to reset the installation so it can be reaccomplished in the HD version?  We've already tried resetting the box (unplug and repower).  Thanks.


 

View solution in original post

2 REPLIES 2
nascar
Gold Contributor IV
Gold Contributor IV
Posts: 1,252
Registered: ‎09-11-2008

Re: SD-HD Selection

Message 2 of 3
(1,909 Views)

You need a 7 Series box....

 

Try this... 

 

To make the guide correct for your TV... Hit Menu on the remote and then go to >> Settings >> Video Settings >> Graphics Settings >> SD or HD 

 

There are plenty of settings in Settings to adjust the screen and guide but you need a 7 series box to take advantage of them.

 

If you don't have a 7 Series box or boxes, I'd get them.

 


tyg wrote:

 

After our HD STB received the IMG 1.9 rollout, the first person to turn it on selected the SD option, even though the STB is attached to an HD TV.  Is there a way to reset the installation so it can be reaccomplished in the HD version?  We've already tried resetting the box (unplug and repower).  Thanks.


 

tyg
Contributor
Contributor
Posts: 2
Registered: ‎09-29-2011

Re: SD-HD Selection

Message 3 of 3
(1,830 Views)

Thanks much.

How-To Videos
 
The following videos were produced by users like you!
   
Videos are subject to the Verizon Fios Community Terms of Service and User Guidelines and contains content that is not created by Verizon.
Have a spare Fios-G1100?Learn how to bridge it into your network
Get Started


Covid19

Browse Categories
Categories:
Posts

Verizon Troubleshooters
Unable to find your answer here? Try searching Verizon Troubleshooters for more options.
Modal Dialogue Title