Switch Account

Who Me Too'd this topic

Posts: 4
Registered: ‎05-16-2020

Fios Functionality With Netgear Nighthawk X6S Router


I've read the pinned post about this and tried to use it as a guide, but I don't seem to have a Fios Functionality with my third party router.  Basically, my Channel Guide and On Demand functions don't work when I tried to make the switch to a better router. 

Here's what I'm working with..

My Quantum Gateway had a coax and an ethernet cable plugged into.  From what I've read, I didn't think I would need a MoCA Adapter.  I released the DHCP lease and turned off the default Fios Wifi Networks.  I then plugged that Ethernet cable into the new router.  I left the coax cable plugged into the Quantum Gateway, as the STB in the bedroom would not work without it plugged in.  Finally, I ran an ethernet from the LAN port of the Netgear Router to the WAN port of the Quantum Gateway. 

Did I miss a step here? I've tried to read as many forum posts about this as I can about this, but maybe there's something that went a little over my head and I missed? 



Who Me Too'd this topic