- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello everybody !
So i have a problem with my new printer Brother MFC-J835DW . I have a verizon fios and wireless router actiontec . So the problem is that i cant connect my printer to my network , it see it but i can connect to it after when connection is failed i got this error report:
Change authentication and ecryption methods of the WLAN acces point/router . Your miachine supports the following authentication methods WPA , WPA 2 ,Open and shared key . WPA supports TKIP or AES ancryption methods . WPA 2 supports AES for the encryption method . Open and shated key correspond to WEP encryption.
But the problem is i dont know how to do it . If anyone here know how to do it please help !!
I tried everything and i did manucal connection and i used ad/hoc settings stuff and it said the printer is connected but i cant use it at all ...
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
logon to the router at 192.168.1.1 by entering the address into your browser.
the userid and password should be admin and the serial number on the back of your VZ router.
If that doesn't work push and hold for 10 secs the reset to factory defaults button the back
The userid will then be admin and you will be prompted for a new password - remember what you enter.
Once logged in select the wireless tab
Select advanced security
Select wpa/wpa2
set stations security to wpa and wpa2
Authentication method preshared key
enter a key - remember it as you will need to enter it into the wireless devices
encryption method AES
select apply
Now go to the wireless devices and at firs access they should request the pre-shared key you entered
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks you , thank you thank you !! i did it , that was really quick and everything works great !! I appreciate that and thanks fot he help !!