- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a Sharp 60" TV and the p265 remote seems to have a hard time controlling it. When I use the remote to do anything (adjust volume, change the aspect ratiio ie: wide, cinema, zoom etc.) the p265 will then change these same parameters on the TV every time I use the remote for doing anything. When using the guide to browse the channels, the volume changes in the last direction I had been changing moving it (volume up or volume down). The mute and A/V buttons also don't work properly, they both mute the volume but the A/V button only does the muting, not the A/V function. I believe I have the wrong remote code for the TV but the only one listed for a Sharp Tv is 342. Does anyone know any other remote codes for Sharp TV's I can try?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have the same problem with a brand new Sharp 43".
After hours on the phone with 5 different tech support folks (including one from India that couldn't speak English) I was told that their remotes do not work with Sharp TVs (code 342) for volume.
Their remotes to not work with Dynex TVs either for volume control
Comcast, when I had them, had remotes that worked fine. But, Verizon is stiffing us with remotes that are {word filter avoidance}.
I see only three choices.
1. Use your TV remote for controlling volume
2. Go out and buy a Harmony universal remote (or similar quality)
3. Cancel your Verizon FIOS TV
I am leaning towards option 3.