Okay, the latest update fixed many of the issues that I was having, but it's added a new one. I've got two DVRs, and this is only happening on one of them.
When navigating the menus and using the remote control arrow keys, it frequently moves twice for each time I press the arrow. So, in DVR, I want to go to the 2nd item, hit the down arrow, and it skips from the 1st item to the 3rd item. I've had times where I have had to hit the up and down arrows 5 or 6 times before it will just move 1 item instead of 2.
I've reset the DVR, have also powered it off for a long period of time and rebooted it. Still happens. I've got 4 FIOS remotes, and it happens with all 4. Take those remotes to the other DVR, no issues. Swap the remotes between DVR, the problem still stays on the one VMS1100 DVR.
Anyone else having this issue? I'm about to request for Verizon to replace the VMS1100 DVR that is having this issue, it's that bad.
And tried the other remote? Doesn't sound like a software bug or both your VMS would misbehave. Most likely a bad remote (stickey key etc). Always possible a bad box. And would you believe Mirror reflections, actually really unlikely, but some possible environment issue.
09-18-2014 04:13 AM - edited 09-18-2014 04:23 AM
It's not the remote. As I stated in my original posting, this is happening with 4 different remotes, including the ones that work fine on other TVs.
I also broke out 3 brand new remotes since my original posting that I had that I wasn't using. Same issue, 7 different remotes. All 7 work perfectly on my other VMS1100. Pretty certain it's not an issue with the remotes.
Multiple people have reported this problem.
Hopefully will be fixed in the release that comes back in the next few weeks.