An Accepted Solution is available for this post.
Shows failed to delete causing DVR to be 100% full
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
One of my DVRs stopped recording because it was 100%. Although all recording are set to "delete when space is needed", there were many shows which could have been deleted. Is this a defective DVR?
2 Replies
An Accepted Solution is available for this post.
Re: Shows failed to delete causing DVR to be 100% full
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Try powering the DVR off and back on. Not with the power switch, but use the power plug. Sometimes that will cause it to clear up space.
An Accepted Solution is available for this post.
Re: Shows failed to delete causing DVR to be 100% full
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@Santanu wrote:
One of my DVRs stopped recording because it was 100%. Although all recording are set to "delete when space is needed", there were many shows which could have been deleted. Is this a defective DVR?
Never tried testing the delete when space is needed - don't trust VZ firmware to do it correctly. Don't know if that function ever worked. I just manage the space such that I delete before reaching 100% (although I have come close). Best bnet is to manually delete those recordings that you don't mind losing and it should record fine.