- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can anyone shed some light on how to configure a magicjack device to work w/out turning off the firewall. I have given magicjack all permissions, opened its ports- but still verizon security suite keeps blocking incoming packets, but not outgoing. Hence, I can call but I get no sounds back.
This only has been a problem since I installed an update from Magicjack. Their support was ok but the problem is really w/the firewall. I must have missed some setting.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you do not know how to take and post screenshots, see as need: portforward.com -> Forum -> Knowledge Base -> How to take and post screenshots.
With the full URL of: http://forum.portforward.com/YaBB.cgi?num=1161783796
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Here is a bit of information I found on the Magicjack FAQ site.
Perhaps port 5060-5070 UDP needs to be open or forwarded to the device. I don't think disabling your firewall like sugested is a good idea. I would try the ports.
"If you are behind a network/external firewall or router, please open port 5060-5070 UDP. Also make sure that the firewall on your router is disabled."
http://www.magicjack.com/1/faq/